| Author |
Message |
Serge
| | Posted on Tuesday, December 06, 2005 - 3:46 am: | |
Hi
After honing the cylinders to the correct clearances[using suzuki rg pistons and a clearance of 3.5 thou at skirt]what would be the proper ring gap range? |
Adrian
| | Posted on Monday, December 12, 2005 - 4:20 pm: | |
Are you using them with one ring or two, road or race?
Either way, a small gap of about 10-15 thou is a good starting point. I think TZ Yamaha's recommend about 12 thou, but i may be wrong on this......
My CR pistons wear rings quickly and the gap becomes visibly larger after a few meetings. I chuck the old ones, fit new and check that there is some gap - then use them! |
|
Advice, help, chat, whatever!