Author |
Message |
Ned
| Posted on Sunday, September 25, 2005 - 3:29 pm: | |
Which plugs should be for T20 racing? |
Spen.
| Posted on Sunday, September 25, 2005 - 3:44 pm: | |
I use NGK 9's and 10s. |
Adrian
| Posted on Sunday, September 25, 2005 - 6:29 pm: | |
NGK B9 or B10 HVX is what I use although my cylinder heads take a long reach plug. You need the short reach version for std heads. I'll find out which one if I can. |
steve halvorson
| Posted on Wednesday, September 28, 2005 - 7:25 pm: | |
Adrian - excuse my lack of attention/planning here, but, is the center port of the oil pump the intake on a 1968 T20? Just need to make sure the oil tank feed line goes to the correct port. Thanks. |
Adrian
| Posted on Thursday, September 29, 2005 - 7:31 pm: | |
Sure is Steve. Don't forget to bleed the pump too - that is the lower bolt in the centre BUT be careful as it has a left hand thread!!!! Adrian |
|