| Author |
Message |
Esa
| | Posted on Thursday, July 03, 2003 - 5:41 pm: | |
Which are the original T20 hub dimensions needed to drill the shouldered rims? |
Adrian
| | Posted on Thursday, July 03, 2003 - 8:43 pm: | |
Hi Esa
I don't quite understand your question - sorry.
Which shouldered rims?
Here is a picture of my spare rear rim and sprocket holder...
Looks good doesn't it!
|
Esa
| | Posted on Friday, July 04, 2003 - 3:49 pm: | |
If I'll order from one company Morad/Akront S Rims drilled they "would need the hub dimensions to drill the rim" but I don't know what to measure.
Of course I can ask them what to measure, but I thought maybe some guy has allready measured. I could too look for a company who has before drilled rims for T20 and thus knows the dimensions needed.
(Yes it really looks good!) |
Adrian
| | Posted on Saturday, July 05, 2003 - 7:30 am: | |
Now I think I understand - They mean the diameter of the hub. The bigger the diameter of the hub, the more of an angle the spokes are at. SO they want the measurement across the hub, from one spoke hole to the opposite one (about 8 inches - but do measure it!) |
Esa
| | Posted on Saturday, July 05, 2003 - 3:19 pm: | |
Thanks - I supposed they would need some complex measures. |
Esa
| | Posted on Sunday, September 07, 2003 - 10:14 am: | |
I did, it's 218mm. |
|
Advice, help, chat, whatever!